Next generation Tapping center

Next generation Tapping center

GV400(Built-in)

GV400(Built-in)

  • High speed, High precision and High rigidity Single table Tapping center
  • Adoption of spindle motor specialized in tapping center
  • High speed turret type automatic tool changer
  • X,Y,Z Rapid travers rate of 60 m/min
  • Steep bed stricture for easy chip discharging
  • Stable and silent travel of table with ball screw & L/M guide
  • Target workpeice: I.T parts, Automotive parts, General parts
  • 600×400

  • GV700

  • 14

  • 200rpm

Ultra high speed MILLING MACHINE

Item Unit GV400(Direct driven)
Table mm 600x400
Loading Kg 200
X/Y/Z Travel mm 540x400x350
Table arbor - BBT30
Spindle speed rpm 20,000
Power(S2/Cont.) kW 11/7.5
X/Y/Z rapid m/min 60/60/60
Tool capacity Pcs 14
Tool exchange time T-T sec 1.1
C-C 1.4
CNC System - FANUC 0i M12
(Siemens 828D, Mitsubishi M80

Overwhelming advantage of GV400

The reduced weight about 35kg on the Z-axis. It can be possible to manufacture with built-in spindle on head body.

  • The life cycle time of ball screw can be extended on the z-axis by reducing the 35kg of the weight.
  • Reducing the cutting cycle time by increasing the cutting speed.
  • Reducing 50% shaft span between cutting position of tool and the driving of built-in spindle compared to traditional tapping centers.
  • Reducing noise level by removing the coupling between motor and spindle. And removed the discordance of alignment in principle.
  • Increasing the speed of the acceleration and deceleration by reducing the inertia(Total 50% length reduced shaft).
  • Easy maintenance, when you exchange the spindles, the beginner can exchange it easily if the Power & Sensor connectors and front bolt can be removed.